Roof Repair Mesa

How to Repair a Leak on a Flat Roof

You face many challenges when managing a commercial structure. General maintenance includes keeping the snow shoveled and the grass trimmed, as well as other tasks. It can be frustrating when your flat roof needs to be repaired.

You are not only decreasing the building's value because of the problems you are having, but the next step is to find local roofing contractors to fix the problem. Arizona roofing contractors are available. It is important to do your research in order to find the best possible contractor.

How to find a leak on a flat roof

There are some things you should remember when assessing flat roofing for leaks. Wait for the roof to dry. This should take three days. Flat roofs will release heat from the holes during the night, which will help you find the problem. If you discover a leak, mark it so that you can refer to it later.

Measure from the outside wall to the problem area. If the roof slopes, it is likely that there is no ponding damage above the mark you have in the trouble area.

After you have identified the problem, make sure to check what has been installed. The problem could be caused by loose flashing, cracked tar, or other materials. The heat from the sun can cause roofing surfaces to expand and contract. Over time this can lead to roof flexibility being compromised and allow water infiltration. To find any areas where water could enter, remove all debris from your roof. Also, check for seams in the roof membrane.

How to Fix a Leak in a Flat Roof

Clearing the roof from all debris is the first step in repairing a leak. This will allow you to determine the extent of the problem and give you direction for how to fix it. Here are some safety tips to help your roof repair Mesa. First, make sure all exits are open and that they're not slippery. Hi-vis clothing is recommended. When using a pressure washer or hose, be sure to keep the trailer away from your face so that you don't trip on it.

Inspection

To find the root cause of a roofing problem you must inspect the entire roof. Start at the edges and work your way to the center. The drains on your roof are the most important area to focus on. If the drains are blocked by debris, water can pond on the roof and water will find its way in. Look for signs of repair, such as patches. These are temporary fixes that fail more often than they should and can be a source of water in your building. They are vital and must be held fast to protect the interior of buildings. Last but not least, check the flashings and collars on the roof to ensure that they are secure and strong.

.

The Repair Cycle

Asphalt Flat Roof Repair

Cracks and blisters are the most common problem on asphalt roofs. These cracks or blisters are caused by moisture in the tar. Rust-Oleum can be used to quickly seal the cracks. Installing a new roof felt patch, which is heated and bonded into place, is necessary for the long term.

Concrete Flat Roof Repair

Concrete cracks over time, which can lead to leaks in buildings that have a concrete roof. To find cracks in the roof's surface, remove all wear. To temporarily cover an emergency repair area, you can use a bitumen primer and bitumen-based painting. You can torch roofing felt to make the repair permanent.

 

Mesa Roofing Pros

930 N Mesa Dr #2001 Mesa 85201

+480-712-3186